Press "Enter" to skip to content

What Is A Robot

.. nveyor. Pallets are platforms on which items are transported or stored. The robot must know if a pallet is filled, half-filled, or empty. Manufacturers use a bar code like the ones in supermarkets to tell the robot about the pallet. Also, some robots have two- dimensional vision that can recognize the pallet. The program tells the robot to place the parts in different positions.

In depalletizing, the program tells the robot where to reach for and object and how to grab it with the correct force. Robots are now used in Hackettstown, New Jersey. They are used to pack M&M’s and then weigh the package to see if the right amount has been packaged. The robots the place the packages in a box. MACHINE LOADING AND UNLOADING Machine loading and unloading robots pick up and transfer parts to and from machines. The die-casting industry uses robots to remove parts from die-casting machines.

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!

order now

The die-casting process forms parts by pouring molten metals in molds which are cooled later. The working environment is unpleasant for humans because of the heat. Preparing molds is tiring and boring because the steps are repeated over and over again. Robots are well suited for this work. SPRAY FINISHING Spray finishing includes the application of paint, enamel, polyurethane, and other protective materials.

Human workers must hold the gun a certain distance and angle from the surface. Also, he must move the gun continuously to prevent dripping. The painter uses his own judgements regarding a good finish. Because of this, products are never identically finished. The spray finishing environment is one of the most noxious for humans to work in. Fumes from solvents are toxic and sometimes carcinogenic.

There is a hazard of fire since finishes are flammable, and noise from air discharge can damage hearing. In the automotive industry, robots are use to paint cars, but cannot paint all of it. Operators must finish the job after the robots have done what they can. The risk of fire demands the hydraulic robots rather than the electric driven robots. Since robots move more smoothly than humans, the paint coat will be more consistent. Also, robots can be programmed to switch colors.

Spray finishing robots cut costs because they require less light, reduce fresh-air requirements, reduce exhaust, and lesson energy costs. Since robots can operated in isolated areas, fewer particles stick to coated surfaces as they dry. The isolated environment also means no ventilation or noise elimination is necessary. ASSEMBLY AND INSPECTION Robots can bolt or screw pieces together depending on the job needed. The assembly lines move fast, so robots are well suited for the job.

The robots move fast and take only one or two seconds to fit pieces together. Inspection robots fit pieces into a mold to see if they fit correctly. If the piece doesn’t fit the robot rejects or signals a warning. Robots can rotate pieces to see if they fit and can change angles. Some advanced robots scan the pieces as they go by on a conveyor belt. The robot then checks the piece’s measurements to the correct measurements.

This technique is very fast and usually accurate. Humans aren’t really interested in this job. Humans would take longer to fit the pieces into the mold because they are not sure which way to turn the piece. Also, humans can’t scan pieces and check the measurements as they go by. ROBOTS IN HAZARDOUS ENVIRONMENTS Master or slave manipulators are robotic arms that humans can control with joy sticks as well as computers.

They are use in hazardous land, sea, and space environments. The nuclear industry handles radioactive fuel and wastes with these devices. The mining industry uses them for waster disposal. Sea salvage operations would be impossible to be carried out without these arms. Even the Space Shuttle use an arm that helps the astronauts launch satellites. Three robotic manipulators are used to maintain the linear accelerator, or “atom smasher”, at the Los Alamos Meson Physic Facility in New Mexico.

When protons are accelerated, strong radioactivity occurs. Even if the machine is off, radiation is still high and hazardous to humans. Workers use the manipulators to maintain the target area. The arms hang over the area from a large hydraulic system. The operators, which are sitting behind a protective wall, move the controller which moves the arm.

The arm has bilateral force sensing which allows the arm to have collisions with objects, and yet continue to work. The arm absorbs the shock the same way a human hand does when catching a ball. With these manipulators, workers can do almost all of the things people can do but without risking the effects of radiation. Soldering, electrical wiring, welding, and handling materials are some of the tasks achieved. In deep-sea activities, the hazard is not the object being retrieved, but depth itself. Humans can withstand depths up to 300 feet.

Depths after that can be dangerous and unsafe because of pressure. A device called a “wasp” was developed and tested. It is a cross between a diving suit and a submarine with two robotic arms. The pilot in the suit can walk on the floor at depths up to 2,000 feet. The diver can look out the plexiglass dome, and move the arms with a joy stick.

The wasp has been used to make many undersea discoveries. Now, several companies have been making and developing remotely operated vehicles (ROVs). One called the Scorpio can dive to a depth of 3,000 feet. It is tethered to a vehicle on the surface where it is controlled from, but it does not need a human inside. Scorpio’s two arms can lift up to 250 pounds water weight. Several multimillion dollar projects are underway to improve ROVs so they can dive to depths of 6,000 feet.

They are needed to salvage costly equipment, and offshore oil industry hopes to use them to maintain rigs. ROBOTS OF THE FUTURE Robotics and robot technology is advancing quickly. There are many dreams to have a robot do something or everything for you. Here are some ideas that we might see in the future. Many people are working on robotic defense systems that can protect the United States from destruction.

Here is one idea: To protect the Unites States from nuclear missile attack, hundreds of nuclear battle stations would be put in orbit. When the station detects a missile launch, it move a hollow tube towards the missile. Then the station launches a laser beam that hits the missile before it reenters the atmosphere. To help astronauts retrieve satellites from space, a remote manipulator operated from inside the ship can be used. The manipulator would get to the satellite by using four small thrusters.

When it reached the satellite, it would use a grappling device to tow the satellite back to the ship. The idea of having the manipulator repair the satellite by itself and return to ship arose from t.


I'm Charlotte

Would you like to get a custom essay? How about receiving a customized one?

Check it out